Solved: CatOS privilege level commands

fabianalfaro · ‎12-22-2008

I have different privilege levels and to set the commands the users on each level are authorized to type I have configured: privilege mode level x command. This is done on equipment running IOS.

Is there a way to define these commands per privilege level on a 6500 running CatOS?

glen.grant · ‎12-22-2008

I believe you can only set them as 0 or 15 on catos.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/8.1/command/reference/set_e_l.html#wp1064371

View solution in original post

glen.grant · ‎12-22-2008

I believe you can only set them as 0 or 15 on catos.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/8.1/command/reference/set_e_l.html#wp1064371

fabianalfaro · ‎12-23-2008

Thanks! That was exactly what I needed.