cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
463
Views
0
Helpful
1
Replies

Upgrade CUCM 6.1.1.2000-3 to 7.0.1.11000-2

waldvoge
Level 1
Level 1

I upgrade today and the Call Manager Service will not start after the upgrade, Cisco Messaging Interface is also not starting. All other services start ok.

Where do I start debugging.

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Terry,

This sounds like a licensing issue. Have you loaded the new 7.x Feature Licenses? This is a common problem when the Callmanager Service won't start. You can fire off an email to;

licensing@cisco.com

to engage them in regards to receiving the proper licenses.

Hope this helps!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Terry,

This sounds like a licensing issue. Have you loaded the new 7.x Feature Licenses? This is a common problem when the Callmanager Service won't start. You can fire off an email to;

licensing@cisco.com

to engage them in regards to receiving the proper licenses.

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: