CISCO sh session vs JUNIPER get session (SESSION ANALYZER)

Unanswered Question
Dec 24th, 2008
User Badges:

Hi,


need to verify on a cisco FW (PIX/ASA/FWSM) the sessions.


Is there available a tool for troubleshooting the output like the Juniper Netscreen freeware tool (NSSA) ?


need to know if for cisco exsist a tool like the following for Juniper FW:




1) download the file NSSA : http://performanceclassifieds.net/NSSA.zip


2) download a TFTP server on your pc


3) execute on the FW the following command vs your tftp:



set console page 0


get session > tftp 194.244.1.87 /tftp/session.txt



with NSSA I can get:



Analyzing the Session table via Filters:

There are multiple filters and soon to be cross filters made for NSSA. With these filters you can troubleshoot attacks, analyze routes, vlans, vpn traffic, and types of connections.


- Number of Results displayed

Here you can select how many results from each filter are displayed. Selecting nothing will display all results.

- Source IP

This filter will list the top source IP addresses with the most connections.


- Destination IP

Exactly like the Source IP filter, this will list the top Destination IP addresses.

- Source Port

Lists the top source ports used


- Destination Port

Lists the top destination ports used

- Vlans

The Vlan filter will list the top used Vlans


- Routes

The Route filter will list the top used Routes


- VSD

The VSD filter will list the top used VSDs


- Tunnels

The Tunnel filter will list the top used Tunnels

- Auto Analyze

The Auto Analyze option will do a quick report the Session table. Listing the top 5 of common filters.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion