cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
725
Views
0
Helpful
4
Replies

Unable to Change Network Settings of IP Phone Manually

iftikharsyed_2
Level 1
Level 1

Hi,

I am unable to change Network Settings of IP Phones registered with CUCM 6.0

When I unlock settings with **# key the "Edit" key is inactive.

How can i solve this problem?

1 Accepted Solution

Accepted Solutions

Hi, you need to go Setting->Network Configuration->Change the option "DHCP Enabled=NO" and save the change.

Hope this help.

David

View solution in original post

4 Replies 4

Chris Deren
Hall of Fame
Hall of Fame

First of all make sure you enter the unlock sequence from the settings menu, press Settings button on the phone.

Second of all you first need to disable DHCP if you want to set the IP address manually.

HTH,

Chris

Thanks for your reply,

I am doing the same, I entered the settings menu by pressing settings button, in NETWORK Configuration option I pressed **#, after that when i go on IP Address Option, the edit key is not enabled.

When i register the same phone with another CUCM it works.

I think this is being controlled from CUCM so any input how can this be allowed from CUCM.

Regards,

Iftikhar

Hi, you need to go Setting->Network Configuration->Change the option "DHCP Enabled=NO" and save the change.

Hope this help.

David

Thanks David,

It worked.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: