C8211 with 4-ADSL problem

armingeorgeo · ‎12-25-2008

Hi,

I'm hoping someone will be able to help me with a solution to my problem.

I have a CISCO 2811 running IOS 12.4 and 4 ADSL lines unfortunately not bonded so have seperate public IP addresses.

thae traffic is pretty much balanced over all 4 lines.

The problem is i can't to connecting to Internet.

Anyone got any bright ideas?

yenlung · ‎12-26-2008

need a route map for your NAT

lejoe.thomas · ‎12-26-2008

Hi,

Please correct all ip nat inside source statements or NAT overload to match traffic based on route-maps.

eg:

ip nat inside source route-map INTERNET1 interface Dialer1 overload

Also add the default route-statement pointing to appropriate dialer interfaces or next-hops associated with that dialer interface such as

ip route 0.0.0.0 0.0.0.0 [dialer interface or next-hop IP] .

Consider reading the following paper as well, to remove inactive routes based on tracking.

HTH

Lejoe