Friends, i can not connect inside my network to outside worlde using VPN client. Earlier i had in my office FreeBSD and did not have this problem (I could connect to remote ASA using VPN client), when i changed FreeBSD to ASA this problem occur. VPN client is connected, tunnel is created but nothing more.
Its Syslog ID 305006 - regular translation creation failed for protocol 50 src inside:10.0.0.22 dst outside:6.168.y.x
Please give me advice how to resolve this problem.
Thanks in advance
correct, that will enable NAT-T on other end, were you enable to VPNin after u enable NAT-t
on other side? just to make sure your problem is resolved.
See Enable NAT-Traversal (#1 RA VPN Issue)
on other side asa do bellow
PIX/ASA 7.1 and earlier
pix(config)#isakmp nat-traversal 20
PIX/ASA 7.2(1) and later
securityappliance(config)#crypto isakmp nat-traversal 20
are you geting the same translation error? if so could u confirm the other end supports transparent tunneling (NAT-T) , if u have some control of other firewall have them enable transparent tunneling , if they do make sure vpn client have in transport tab NAT-T enabled which is default, Ipsec over UDP (NAT/PAT) 1000.
Get back if still problems.