cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
251
Views
0
Helpful
1
Replies

Multiple interface configuration

Lavanholy
Level 1
Level 1

Hi,

I have a Cisco ASA5510 firewall edition,Interface E0/0 (outside) is connected to Internet,Interface E0/1 (Inside) is connected to LAN switch,Interface E0/2 (Traffic2) is connected PE router of the MPLS Cloud,Routing is done in the MPLS cloud for both side LANs.

Now from my firewall I am able to ping the other side MPLS PE router IP address..

But from my LAN I am not able to PING the other side PE router IP address.

I have checked using extended PING,that is from the Inside Interface E0/1 to Interface E0/2,it is not pinging,What could be the problem?I have configured ACL name called TRAFFIC2 to allow the traffice from the LAN to other side MPLS WAN and then to the other side LAN and vise versa.

I have applied the ACCESS-GROUP TRAFFIC 2 in interface TRAFFIC2.

Please help me.

Thanks and Regards,

S.Venkataraman.

1 Reply 1

andrew.prince
Level 10
Level 10

Check your NAT.

HTH>

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: