query on Alert/activity in LMS

Unanswered Question
Dec 26th, 2008
User Badges:

Hi Team


I have few questions on NMS functionality.

I would like to receive Alerts / Notifications when below incidents happen.


1. A Duplicate IP Address comes into Network


2. VLAN flapping.


3. A Major STP Changes.


4. When routing change happens

Kindly advice on the same could be configure the same on LMS.


Regards

Vaibhav

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Fri, 12/26/2008 - 08:18
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The first three can happen simply by managing your devices in DFM, and configuring them to send traps to DFM. DFM has a built-in duplicate IP event, and will send events for interface flapping and STP changes provided device traps are configured.


The final event can be handled by sending syslog messages to RME. You can then configure a syslog automated action to send you email when routing-based syslog messages are received. Syslog automated actions can be configured under RME > Tools > Syslog > Automated Actions.

vaibhav-g Tue, 01/06/2009 - 10:14
User Badges:

Hi Clarke


we have configured the same..but we are not getting mails for DUPLICATE IP ADDRESS.


we are able to see the alerts on LMS but not gettin alerts on mail for duplicate address..


Kindly provide the solution for the same.


Thanks & Regrads

Vaibhav

Joe Clarke Tue, 01/06/2009 - 10:21
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You need to configure a Notification Group as well as an Email Notification Subscription under DFM > Notification Services in order to receive email. If you choose to create an Event Set so that you only get emails on duplicate IP addresses, add the "Duplicate" event to your Event Set, then only check the following boxes in your Notification Group:


Event Severity:

Critical

Informational


Event Status:

Active

Cleared

Actions

This Discussion