switch 2960

Unanswered Question
Dec 28th, 2008
User Badges:

i have cisco switch 2960 there is no ios in this switch but letters and words appears like that iôchi think some thing wrong in language whate i can do to recover my switch and fix language problem


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joseph W. Doherty Sun, 12/28/2008 - 08:57
User Badges:
  • Super Bronze, 10000 points or more

Does the strange letters and words appear with a console connection? Are you using the correct RS-232 settings (e.g. 9600 bps, etc.)?

mansourcisco Sun, 12/28/2008 - 09:02
User Badges:

no my connection in console is ok and i use correct setting

plz help

Roberto Salazar Mon, 01/12/2009 - 15:41
User Badges:
  • Gold, 750 points or more

How are you verifying that the console connection is okay? The switch does not support any other language. the issue is either the console is defective (hardware), wrong cable, wrong console setting. If there is no IOS on a 2960 you should get a "switch:" prompt, nothing else.

hetene_kaz Tue, 12/30/2008 - 06:11
User Badges:

Check configuration register. Must be 0xF.

If set to another - console speed can be another. Try all available console speeds on your PC. Remove all points like Xon/Xoff, DTR/DSR, RTS/CTS.

mansourcisco Mon, 01/12/2009 - 10:50
User Badges:

i cant read any thing i havent ios in my switch i use now ifs commands

Actions

This Discussion