UC500 fax problem.

Unanswered Question
Dec 29th, 2008

Hi, i have a problem, i configurated the uc500 to recive fax to a extension... this have a dial-peer with

dial-peer voice 2001 voip

description ** cue auto attendant number **

translation-profile outgoing PSTN_CallForwarding

destination-pattern 777


no modem passthrough

session protocol sipv2

session target ipv4:

dtmf-relay sip-notify

codec g711ulaw

fax-relay sg3-to-g3

fax-relay ans-disable

fax rate disable

fax nsf 000000

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco

no vad

when i try to pass a fax to the extension, start the negociation with the fax ( tones like modem ) but never finish, keep the tones and never get connected..

this is the debug::

Dec 27 16:44:25.923: 0/1/0 69715472 fr-entered=10(ms)

Dec 27 16:44:25.923: 0/0/0 (217) 69715474 fr-entered=10(ms)

timestamp=69716564 fr-msg-det NSF

timestamp=69716872 fr-msg-tx NSF

timestamp=69717764 fr-msg-det CSI

timestamp=69718072 fr-msg-tx CSI

timestamp=69718504 fr-msg-det DIS

timestamp=69718812 fr-msg-tx DIS

timestamp=69724694 fr-msg-det NSF

timestamp=69725002 fr-msg-tx NSF

timestamp=69725894 fr-msg-det CSI

timestamp=69726202 fr-msg-tx CSI

timestamp=69726634 fr-msg-det DIS

timestamp=69726942 fr-msg-tx DIS

timestamp=69733324 fr-msg-det NSF

timestamp=69733632 fr-msg-tx NSF

timestamp=69734524 fr-msg-det CSI

timestamp=69734832 fr-msg-tx CSI

timestamp=69735274 fr-msg-det DIS

timestamp=69735582 fr-msg-tx DIS

timestamp=69741984 fr-msg-det NSF

timestamp=69742292 fr-msg-tx NSF

timestamp=69743184 fr-msg-det CSI

timestamp=69743492 fr-msg-tx CSI

timestamp=69743924 fr-msg-det DIS

timestamp=69744232 fr-msg-tx DIS

please help!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jsivulka Fri, 01/02/2009 - 09:55

add the following modifications:

voice-port 0/0/0

connection plar 299

dial-peer voice 1 pots

incoming called-number .%


port 0/0/0

dial-peer voice 6 pots

destination-pattern 0T

port 0/0/0


This Discussion