RAID controller issue in Unity Server

Unanswered Question
Dec 29th, 2008

End user report one of the harddisk in Unity server display error. The Unity server is a HP 7846 server that have a RAID controller defined in TOW array. Array A have two harddisk with 18GB in slot 0 and 1. Array B have three harddisk with 36.4GB in slot 2,3 and 4.

I found out the harddisk in slot 4 display error and I unpluged it and replaced it with another 36.4 BG harddisk. The array B does not re-create the system.

And I find out the member of the Array B change from slot 2,3 and 4 to 2, 3 and 6.

Slot 5 is the tape backup system.

I don't know how to fix it, Can someone help me to solve this issue?

Can I hardcode the hard disk in slot lable 4 to 6 in order to allow the Array B to perform rebuild.

Screens are attached .

Thanks in advance for any inputs in this case!!!


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion