6509 Load Balancing

Answered Question
Dec 29th, 2008

Hello guys,

How can I implement load balancing and redundancy at my two 6509 Switch?

Thanks in advance.

Cheers!

I have this problem too.
0 votes
Correct Answer by Collin Clark about 7 years 11 months ago

The easiest way would be to implement VSS. It may require a Sup and/or chassis upgrade.

http://www.cisco.com/en/US/products/ps9336/index.html

Another way is to implement first hop gateway redundancy using HSRP or GLBP.

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.html

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00807d2520.shtml

Hope that helps.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Collin Clark Mon, 12/29/2008 - 06:13

The easiest way would be to implement VSS. It may require a Sup and/or chassis upgrade.

http://www.cisco.com/en/US/products/ps9336/index.html

Another way is to implement first hop gateway redundancy using HSRP or GLBP.

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.html

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00807d2520.shtml

Hope that helps.

Actions

This Discussion