cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
386
Views
0
Helpful
1
Replies

SNMP for 3 parties

leowchongwei
Level 1
Level 1

Hi,

Is there a way for SNMP to be accessible by 3 different parties? 2 service provider and the enterprise need to poll the router and receive traps to each of their NMS. Can i setup multiple SNMP trap source and tie each source to a different host server?

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

Sure. You don't even need SNMPv3 for this, either (however, v3 will make things more secure). You can define as many trap destinations as you want, though Cisco recommends no more than three:

snmp-server host 10.1.1.1 ...

snmp-server host 20.1.1.1 ...

You can also define multiple community strings or SNMPv3 credentials for polling. See http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml for more on securing SNMP.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: