H.323 Trunk selection order - failed trunk

Answered Question
Dec 29th, 2008
User Badges:

When using MGCP with CUCM if there is a failed trunk, it realizes it's failed and jumps to the next trunk.


When using H.323 (my personal preference) if the trunk it choses does not work, it simply fails dropping fast busy to the end user - making the rest of the lines useless. Is there a command in the IOS to tell it to try the next trunk in a trunk list in the event of failure?

Correct Answer by Jaime Valencia about 8 years 5 months ago

change this on CUCM


Clusterwide Parameters (Route Plan)

Stop Routing on Unallocated Number Flag = False

Stop Routing on User Busy Flag = Flag


or on GW:


no dial-peer outbound status-check pots


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 12/29/2008 - 11:42
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

change this on CUCM


Clusterwide Parameters (Route Plan)

Stop Routing on Unallocated Number Flag = False

Stop Routing on User Busy Flag = Flag


or on GW:


no dial-peer outbound status-check pots


HTH


java


if this helps, please rate

Actions

This Discussion