IOS recover 1131 acees point

navinder.singh · ‎12-29-2008

AP 1130 Model AP's IOS has got corrupted and AP is not booting properly its going in to AP: prompt

I have tried to recover the same by following the procedure but unable to recover the same, following is the link is the procedure which I applied

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38trb.html

Kindly suggest me any specific procedure for AP 1130 model to recover the IOS form AP: mode.

saimakram · ‎12-30-2008

my dear

u may try this PDF it is for switches but i am sure u will get an idea how to recover and i am sure it will Work.

Regards.

saimakram · ‎12-30-2008

my dear

u may try this PDF it is for switches but i am sure u will get an idea how to recover and i am sure it will Work.

Regards.

Leo Laohoo · ‎01-13-2009

Try TFTPDNLD from the ROMMON.

Stephen Rodriguez · ‎01-14-2009

Follow the information on the link below. Just make sure you have the image for the 1130

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered