Fails to learn mac address on Fiber interface with ISP

Unanswered Question
Dec 29th, 2008
User Badges:

Hi,


We have a problem to bring a new 3750 switch interface up with the ISP.


Current interface configuration on the router 7500 with SC/Single mode 1000 Base LX is


interface GigabitEthernet4/0/0

description ###### ISP #######

ip address 1.1.1.2 255.255.255.252

no ip redirects

no ip unreachables

load-interval 30

no negotiation auto

no cdp enable

end


works perfectly fine.


we are trying to move this link to a Cisco 3750G on SFP single mode 1000 baase LX with the same configuration as below


interface GigabitEthernet1/0/51

no switchport

ip address 1.1.1.2 255.255.255.252

load-interval 30

no ip redirects

no ip unreachables

no cdp enable

speed nonegotiate


we dont get any errors on the link but it fails to learn the mac address from the isp.


checked the following.


1. tried changing the SFP and the fiber.

2. checked internally connecting back to back with another cisco device - works fine .

3. checked with the isp for any static arp on their side and it is a no.


I am wondering why it fails to learn the mac-address when it can self ping its own ip address and also the layer stays up with no errors on both the sides.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Tom Randstrom Tue, 12/30/2008 - 06:28
User Badges:
  • Gold, 750 points or more

Doesn't feel like a fiber/optical issue but a configuration mismatch on one of the end devices.

Actions

This Discussion