error message in VSS

Unanswered Question
Dec 30th, 2008


I have 2 Catalyst 6500 working as VSS.

After making an upgrade of IOS (current: s72033-ipservicesk9_wan-mz.122-33.SXI.bin) gives the following error message:

SW1_SP: Insertion of mld_s_g_type in the tree failed WAVL grp

I searched information about this message but I have not found anything, someone who knows it?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
burleyman Tue, 12/30/2008 - 05:30

If I am not mistaken this points to an internal software error. I would gather all the info and open a TAC case.

I will see if I can find some info on it.


burleyman Tue, 12/30/2008 - 05:37

You could also run show tech-support and see if anything shows up on that, you will need to run it for the TAC case anyway.


sdurn Tue, 12/30/2008 - 06:30

this error is referred only to the supervisor in sw1 and it's not the same with supervisor in sw2...

it can be due to a bad insertion of the card?

burleyman Tue, 12/30/2008 - 07:11

It could be. I did some further checking and the WAVL does point to a software issue but I could not find the exact error anywhere. It could be some type of bug. We run VSS here but we are not running that IOS we use advipservicesk9_wan-vz.122-33.SXH3.bin

I would open a TAC case if you can or maybe reload the software as maybe it got corupt.



This Discussion