Inter-group call on Callmanager 4.0

Unanswered Question
Dec 30th, 2008
User Badges:

I have callmanager 4.0 installed, i want to achieve a scenario where three different groups could only call within the group but not inter-group. I set up 3 different callingsearchspace/partition but still the group can do intra group call, which i do not want. {Group A = 100X, Group B =200X, Group C = 300X}

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Tue, 12/30/2008 - 08:05
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

You are on the right path, all of these is accomplished via CSS/PT, so here is what you need to do:

put all group A DNs in parition lets call it GroupA_PT,

put all group B DNs in GroupB_PT

put all group C DNs in GroupC_PT,

create 3 Calling Search Spaces, each referencing it's own PT, and not the others, i.e.

GroupA_CSS, inlcudes GroupA_PT

Assign corresponding CSS to local devices, i.e. phone in group A would use GroupA_CSS.

That's it!!!


HTH,

Chris


exchange1 Tue, 12/30/2008 - 11:05
User Badges:

Thank you Chris, I actually did what you suggested but I can still make inter group calls. Is there any other things I need to do?

exchange1 Tue, 12/30/2008 - 11:37
User Badges:

Hi Chris,


It is working now, I restarted the server and it is fine.

Chris Deren Tue, 12/30/2008 - 11:43
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Glad to hear that.


Chris

Actions

This Discussion