John Blakley Wed, 12/31/2008 - 09:03

You might be able to do a "sh ver" to get the mac (I got it from my ASA this way), but you should also be able to do a "sh int" as well. It's not possible to change the mac address on the PIX.



HTH,


John

steve_steele Thu, 01/01/2009 - 16:04

If it's plugged into a switch that you have access to you could look in the arp table for the ip address.


show arp | inc 123.123.123.123


or look in the mac address table for the interface.


show mac address-table interface fa0/1


HTH


Steve

edusmartnet Wed, 01/07/2009 - 05:47

A "sh ver" will show the mac address of each of the ethernet interfaces

Actions

This Discussion