Pravin Phadte Wed, 12/31/2008 - 02:41
User Badges:
  • Silver, 250 points or more

what kind of wan ports are u looking for ?

sachinraja Fri, 01/02/2009 - 11:54
User Badges:
  • Red, 2250 points or more

Hello Kumar


Firewalls are normally chosen, taking into consideration a lot of important points:


1) no of interfaces needed (Inside, outside, DMZ)

2)Throughput of FW

3) max connections

4) Feature sets needed (IPS etc)

5) Max vpn support..


and many other points.. ALso based on the end user business or use (Datacenter, remote office etc)


Attaching a URL which has comparisons of all the ASA firewalls. Check what you need. You can look out for 5510,20 or 40 kind of appliance.


http://cisco.com/en/US/products/ps6120/prod_models_comparison.html


Hope this helps.. all the best.. happy new year.. rate replies if found useful..


Raj

Pravin Phadte Sun, 01/04/2009 - 22:39
User Badges:
  • Silver, 250 points or more

Thats good information provided by sachinraja.


Most of the firewalls in market are without WAN ports. All eth,FA,Gbic ports in cisco.


http://www.nokiaforbusiness.com/nfb/find_a_product/product_details.html?guid=0e035565eec86110VgnVCM200000718ef393RCRD&cat=e01e5565eec86110VgnVCM200000718ef393RCRD


check link above for more inforation on NOkia

Actions

This Discussion