12-31-2008 02:56 AM - edited 03-06-2019 03:12 AM
Could you tell me if this config can work please:
-Catalyst 6506 enhanced 6-slot shassis 12U
-Catalyst 6500 Super.Engi-2,2GE+MSFC2/PFC-2
-Catalyst 6500 48-ports Gig-E Mod:(req.SFP)
Think you for your help.
Solved! Go to Solution.
01-05-2009 01:59 AM
12-31-2008 05:04 AM
Could you provide part number of 48 port module ie.
WS-X6???
If the module is a WS-X67xx module part number then you cannot use this with a supervisor 2, you will need a sup 720.
Jon
12-31-2008 05:52 AM
Ok it's the WS-X6748.
Which sup. engine should i used
12-31-2008 07:39 AM
If you want to use the WS-X6748-GE-TX then you have to have a Sup720 ie. you cannot use a Sup1a, sup2 or a sup32.
Jon
01-05-2009 01:58 AM
I can i use the WS-X6748-SFP on the Sup 720 ?
01-05-2009 01:59 AM
Yes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide