12-31-2008 05:50 AM - edited 03-15-2019 03:17 PM
I need to move my voice gateway with an analog phone behind a PAT device that allows only port redirection.
I'm looking for help because now I'm not able to make an in or outbound call.
I believe I have a problem with NAT.
12-31-2008 11:06 AM
Hi Andrea,
You will need to make sure that your PAT device supports fixup for the protocol you're using. If you're using H323, make sure it is H323-aware, or if you're using SIP, make sure it's SIP-aware. Also know that there are different versions of H323, and the gateway should use version 4 if you're on a more recent IOS.
We have some features that allow for the gateway to get around non-aware devices, but it is only available on the 5x00 boxes.
hth,
nick
12-31-2008 01:22 PM
Hi Nick and thanks for your help.
My PAT device doesn't support fixup for SIP.
Happy new year!
Andrea.
01-01-2009 07:32 AM
There is a way to configure STUN on my 1751v?
Thanks.
Andrea.
01-07-2009 11:22 PM
Any ideas!?
Thanks.
Andrea.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide