Does WS-F6K-PWR support 802.3af

Answered Question
Dec 31st, 2008
User Badges:

Hi, I'm trying to use module WS-X6348-RJ-45 with WS-F6K-PWR in a 6509 with a Cisco IP Phone 7975G without success.


Just to confirm, Does the sub-module WS-F6K-PWR support 802.3af


Thanks in Advanced

Correct Answer by Rob Huffman about 8 years 7 months ago

Hi Andre,


Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.


WS-F6K-PWR


Maximum Power Per Port (W) 6.3


Table 55-5 Efficiency of Voice Daughter Cards


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/voicecfg.html#wp1057105



The 7975 is a Class 3 device which has;


Required Power (W) 15.4


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 12/31/2008 - 08:49
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Andre,


Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.


WS-F6K-PWR


Maximum Power Per Port (W) 6.3


Table 55-5 Efficiency of Voice Daughter Cards


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/voicecfg.html#wp1057105



The 7975 is a Class 3 device which has;


Required Power (W) 15.4


Hope this helps!

Rob

Actions

This Discussion