Solved: CONFIGURING INTERCOM IN CCM 4.1

jorgeacat · ‎12-31-2008

HOW CAN I CONFIGURE THE OPCION OF INTERCOOM IN CCM 4.1.? I KNOW THAT CCM NOT SUPPORT THIS OPTIONS

IS THERE AN OPTION?

edison_abad · ‎01-01-2009

This is a workaround and you need to have a to do a lot... but it works.

Partition

=========

PT1

PT2

CSS

===

CSS1

- PT2

CSS2

- PT1

Phone1 Intercom Line

====================

- DN1

- PT1

- CSS1

- AutoAnswer

Phone2 Intercom Line

====================

- DN2

- PT2

- CSS2

- AutoAnswer

Translation Pattern1 (PHONE1 -> PHONE2)

=======================================

Pattern -

Partition - PT2

CSS - CSS1

Called Party Transform Mask - DN2

Translation Pattern2 (PHONE2 -> PHONE1)

=======================================

Pattern -

Partition - PT1

CSS - CSS2

Called Party Transform Mask - DN1

View solution in original post

Chris Deren · ‎12-31-2008

The typical way this has been tackled in CM 4 is by utilizing auto answer feature and speed dials. So, assume you have 2 phones A and B, and both need intrcom to each other, you would configure them as following:

Phone A:

Line 1 - regular DID

Line 2 - intercom DN set for auto answer

Speed 1 - speed dial to phone B line 2

Phone B:

Line 1 - regular DID

Line 2 - intercom DN set for auto answer

Speed 1 - speed dial to phone A line 2

HTH,

Chris

edison_abad · ‎01-01-2009

This is a workaround and you need to have a to do a lot... but it works.

Partition

=========

PT1

PT2

CSS

===

CSS1

- PT2

CSS2

- PT1

Phone1 Intercom Line

====================

- DN1

- PT1

- CSS1

- AutoAnswer

Phone2 Intercom Line

====================

- DN2

- PT2

- CSS2

- AutoAnswer

Translation Pattern1 (PHONE1 -> PHONE2)

=======================================

Pattern -

Partition - PT2

CSS - CSS1

Called Party Transform Mask - DN2

Translation Pattern2 (PHONE2 -> PHONE1)

=======================================

Pattern -

Partition - PT1

CSS - CSS2

Called Party Transform Mask - DN1