01-01-2009 10:17 AM - edited 03-13-2019 05:58 PM
Hi All,
I Have CME 4.2 with CUE 3.2.1 and i configured auto attendant. The problem is when a caller from PSTN Hear the auto attendant message and when he choose 1 or 2 or else on keypad nothing happen and the option is not entered
Here is somme informations about my config:
voice-port 0/1/1
connection plar opx immediate 499
description Ligne 606622
caller-id enable
dial-peer voice 402 voip
description Auto-Attendant
destination-pattern 499
session protocol sipv2
session target ipv4:10.254.254.11
dtmf-relay sip-notify
codec g711ulaw
no vad
any idea to help me
Thanks
01-03-2009 01:04 PM
i have the same problem did you find any solutions
01-04-2009 02:42 PM
Hi, this is an odd issue. I have almost the same configuration working fine.
Try to change the destination-pattern to 4.. and restart the CUE.
Hope this little comment help you.
David
01-05-2009 07:39 AM
just something to test - you can configure the voice port to plar to an ephone dn and configure call forward all to 499
it seems to be a DTMF issue
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: