cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
368
Views
0
Helpful
2
Replies

Unity 5.x Failover - FailTCPConnect

This event points to network problem?

Event Type: Information

Event Source: CiscoUnity_TSP

Event Category: None

Event ID: 145

Date: 1/2/2009

Time: 2:25:43 PM

User: N/A

Computer: xxxxxxxxx

Description:

Cisco Unity-SCCP TSP device 20 (Cisco Unity port 16): Connected to CUCM server 10.80.240.26:2000. This is not the primary CUCM server in this cluster, so Cisco Unity will periodically attempt to failback to the primary server, if configured to do so.

Failover Technical Details: FailTCPConnect

The Cisco Unity-SCCP TSP version is 8.3(1.0)

2 Replies 2

Tray Stoutmeyer
Cisco Employee
Cisco Employee

If you have many of them, then possibly. What this is saying is that you have another CUCM in your UTIM listed as the primary CUCM you want your ports to connect with. Right now, port 16 is connected but it is connected to a CUCM that is not your primary designated CUCM. If your CUCM cluster is configured right, then this should affect any functionality as the ports seem to be registered with another CUCM that should be able to communicate with the Unity. Regardless, something is up with connectivity to your primary CUCM and you should investigate it.

Tray

this is happening on multiple ports,

what would happen to a active call in such a scneraio, would it disconnect or failover?

Avinash

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: