01-03-2009 02:06 AM - edited 03-13-2019 05:58 PM
Hi Experts
CME and CUE in one router. when i access the CUE from the IE , i put the CUE username and password and i get in. After that it asks me to enter CME username and password to run the wizard. whenever i put the password i get this crappy message "Login to cisco CME as Administrator failed. check your call manager express config" i have cheked my config many times. Please let me know if someone has faced this problem or any suggestion on this. today is the 2nd time i have faced this problem , last time I cud not solve it and end up wasting 6 hours...
please help
01-03-2009 05:56 AM
Hi, check if you have these prameters:
#ip http server
#ip http path flash:
under telephony services
#web admin system name username password string
#dn-webedit
#time-webedit
Hope this help
David
01-04-2009 10:31 AM
Hi friend,
Here is the Prerequisites for Installing Cisco Unity Express Software. As David describes, may be the CME admin account is missing:
Try this, and let us know.
Best regards,
- Adrián.
11-16-2011 09:10 AM
I had this issue with CCME v8.8.
In order to enable GUI on CME 8.8, please add the following IOS commands into the router:
Router>
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#file privilege 0
Router(config)#
Router(config)#exit
11-13-2012 12:35 PM
#file privilege 0 did the trick for me - thanks for the assist.
C2921 w/ ISM v8.6.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide