01-03-2009 09:17 AM - edited 03-04-2019 03:18 AM
Hi ALL:
Happy New Year
I am getting this error when trying to copy the run to start up could any one explain the reason.
Router#cop
Router#copy run
Router#copy running-config st
Router#copy running-config startup-config
Destination filename [startup-config]?
startup-config file open failed (No such file or directory)
Router#copy running-config startup-config
Destination filename [startup-config]?
startup-config file open failed (No such file or directory)
Router#
Router#sh star
Router#sh startup-config
Using 1821 out of 196600 bytes
%Error opening nvram:/startup-config (No such file or directory)
Router#
Router#
Router#copy startup-config running-config
%% Non-volatile configuration memory invalid or not present
Router#
Router#sh startup-config
Using 1821 out of 196600 bytes
%Error opening nvram:/startup-config (No such file or directory)
Router#sh flash
Router#sh flash:
-#- --length-- -----date/time------ path
1 1821 Dec 28 2007 00:48:26 +00:00 sdmconfig-18xx.cfg
2 861696 Dec 28 2007 00:48:50 +00:00 es.tar
3 1164288 Dec 28 2007 00:49:16 +00:00 common.tar
4 1038 Dec 28 2007 00:49:40 +00:00 home.shtml
5 113152 Dec 28 2007 00:50:04 +00:00 home.tar
6 20570916 Feb 23 2008 07:30:52 +00:00 c1841-spservicesk9-mz.124-16b.bin
9203712 bytes available (22728704 bytes used)
Router#
Router#
Router#sh ver
Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(16b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 19-Dec-07 23:28 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 47 minutes
System returned to ROM by power-on
System image file is "flash:c1841-spservicesk9-mz.124-16b.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 1841 (revision 7.0) with 114688K/16384K bytes of memory.
Processor board ID FHK115225UY
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 ISDN Basic Rate interface
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Chao
Vishwa
01-03-2009 03:16 PM
Vishwa
This is a very unusual symptom. Would you post the output of show file system from this 1841.
HTH
Rick
01-03-2009 11:04 PM
Vishwa,
This case is happend due to buffer issue in NVRAM.We have to clear NVRAM,so erase the NVRAM and try ..it will work..
Command - Router#erase nvram:
after clearing the NVRAM don't restart the router without copy the config to start-up.
Regards,
STALIN P
01-04-2009 08:51 PM
Thanks Guys ,
For the reply issue is resolved.
I dont know why it was happenning i did the same step after reload and it worked .
Crazy Ciso.
Chao
Vishwa
01-05-2009 01:42 AM
Do
#format nvram:
and try
01-05-2009 05:12 AM
Vishwa
Thank you for posting back and telling us that the issue was resolved when you reloaded the router. It makes the forum more useful when people can read about a problem and can read what was done that resolved the problem.
HTH
Rick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: