ios uploading using xmodem in 3750 switch

shiv · ‎01-05-2009

Hi Support,

Shiva here how can i upload new ios in 3750 switch using xmodem ? because i deleated flash of the same switch.

mahmoodmkl · ‎01-05-2009

Hi

hope this link will help u.

http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml

Thanks

Mahmood

shiv · ‎01-08-2009

Thanks alot Mahmood.

Do u know any practical truobleshooting orinted books for ccnp and ccie in routing and switching.If u have pls send the link.

K bye

Take care...........

Regards,

Shivanand

Giuseppe Larosa · ‎01-05-2009

Hello Shiva,

you can use the procedure

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.1_14_ea1/configuration/guide/swtrbl.html#wp1099467

note: setting the speed to 11500 bps can save hours of download time I did it you need the change the parameters on the device and then on the PC terminal emulator before starting the download.

but if you didn't switch off the switch you can use TFTP to write the image on your flash becuase you still have an IOS running

Hope to help

Giuseppe