01-05-2009 04:29 AM - edited 03-06-2019 03:15 AM
Hi Support,
Shiva here how can i upload new ios in 3750 switch using xmodem ? because i deleated flash of the same switch.
01-05-2009 04:43 AM
Hi
hope this link will help u.
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml
Thanks
Mahmood
01-08-2009 10:29 AM
Thanks alot Mahmood.
Do u know any practical truobleshooting orinted books for ccnp and ccie in routing and switching.If u have pls send the link.
K bye
Take care...........
Regards,
Shivanand
01-05-2009 04:43 AM
Hello Shiva,
you can use the procedure
note: setting the speed to 11500 bps can save hours of download time I did it you need the change the parameters on the device and then on the PC terminal emulator before starting the download.
but if you didn't switch off the switch you can use TFTP to write the image on your flash becuase you still have an IOS running
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: