01-05-2009 02:02 PM - edited 03-04-2019 03:20 AM
I couldnt understand the difference between Committed Information Rate (CIR) and Committed Access Rate (CAR). Both are applied for policing the traffic. Can some one explain me in detail.
Many Thanks,
Saran
01-05-2009 02:12 PM
Good Day Saran,
CAR - is an older method to rate-limit traffic on a Cisco device. It is configurable, but it is done seperately from Cisco new modular QoS approach.
http://www.cisco.com/en/US/docs/ios/11_1/feature/guide/CAR.html
CIR - Committed Info Rate is used in traffic shaping and policing using Cisco's newer QoS method.
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml
hope this helps.
03-03-2016 04:12 PM
They are the same from protocol's view. The CIR word came from some nephew software engineer of some one. Hired before he/she got CCIE, he/she was allowed to leave a mark in history without innovation. We all have been colleagues of a person like that. It should have been called "CAR on MQC", which does not sound very cool, does it? It should not be called Information Rate. Where is the information? Router1 or Router2 or Server1 or Server2, or all, or both? It is customary to call digital data in transit "data", and called signal when data is modulating carrier wave, not information.
I was being nice to say "without innovation". In reality, it is a total flop. The access rate conveys ideas of hardware limitation with ISP , for example frame-relay clock rate is proportional to access rate. On top of access rate, the adjective "committed" conveys the economical operation done manually by operators.That nephew didn't know it and thought others wouldn't notice the missing noun for the adjective "committed" in CIR. Where is the information rate of your frame-relay for the ISP to commit?
The word CIR needs to be eliminated for cisco to advance innovation.
03-13-2016 05:28 PM
They are the same from protocol's view. The CIR word came from some nephew software engineer of some one. Hired before he/she got CCIE, he/she was allowed to leave a mark in history without innovation. We all have seen colleagues of a person like that while we work as programmers programming everyday. It should have been called "CAR on MQC", which does not sound very cool, does it? It should not be called Information Rate. Where is the information? Router1 or Router2 or Server1 or Server2, or all, or both? It is customary to call digital data in transit "data", and called signal when data is modulating carrier wave, not information.
I was being nice to say "without innovation". In reality, it is a total flop. The access rate conveys ideas of hardware limitation with ISP , for example frame-relay clock rate is proportional to access rate. On top of access rate, the adjective "committed" conveys the operation done manually by operators.That nephew didn't know it and thought others wouldn't notice the missing noun for the adjective "committed" in CIR. Where is the information rate of your frame-relay for the ISP to commit?
The word CIR needs to be eliminated for cisco to advance innovation.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: