×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

BGP Quick Clarification Question

Unanswered Question
Jan 6th, 2009
User Badges:

Greetings,


Router BGP is redistributing an OSPF instance. The OSPF instance carries a 10.10.10.x/24 and 192.168.10.x/24 networks. Do I need to specify both networks in bgp? For Example


router bgp 65000

network 10.10.10..0 mask 255.255.254.0

network 192.168.10.0 mask 255.255.255.255

redistribute ospf 100



Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jon Marshall Tue, 01/06/2009 - 15:34
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

No you don't need to have network statements if these are in the IGP routing table and you are redistributing OSPF into BGP.


The network statements would be needed if they were in the IGP table but you were not redistributing into BGP.


Edit - you may also want to look at this doc as there are a number of options as to which types of OSPF route you redistribute into BGP -


http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800943c5.shtml


Jon

Actions

This Discussion