removing call application problems.

Unanswered Question

hey all,


need some help here, i am trying to remove the call application in my cisco 5400 with no luck.


this is what i got in the config:

call application voice au_ani tftp://10.10.1.9/au_ani.tcl

call application voice au_ani tftp://10.10.1.8/au_ani.tcl au_ani

call application voice au_ani flash:au_ani.tcl au_ani

!


i would like to have only the flash one but when i try to remove the 10.10.1.8 and .9 i get the following:



wtild1(config)#no call application voice au_ani tftp://10.10.1.9/au_ani.tcl

% Incomplete command.


wtild1(config)#no call application voice au_ani tftp://10.10.1.9/au_ani.tcl ?

WORD Value for the parameter


wtild1(config)#no call application voice au_ani tftp://10.10.1.9/au_ani.tcl bla

wtild1(config)# call application voice au_ani

% Incomplete command.

wtild1(config)#no call application voice au_ani

Failure deleting app(Tcl) au_ani


any ideas????


i would like to have the first one the flash and then the tftp ones.


any help would be greatly appreciated.


Thanks,


J.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion