can anyone help me to sort out the following issues I faced during the installation of Clean Access Server/Manager in
HP Proliant DL 360 G5
Controller: HP Smart Array P400 Controller
a. first question is whether I can install both Clean Access Server & Manager in One HP Server
b. After the server boots from the CD it , got pause showing the command " running /sbin / loader.
when I checked it shows " Waiting for the USB device to be stable 20 secs"
c.When I tried to install only the Clean Access Server , after loading anaconda it shows " no valid devices were found o which to create new file systems.Plese check your harware for the problem "
Expecting your valuable reply for the same
CAS and CAM comes as a built appliances from cisco.. this isnt like a CUCM, call manager where you get the software and put it on a hardware customizable by you.. the 3300 servers come on different specifications.. have a look at the datasheet:
appliances 3350, and 3390 support smart array E200i controllers.. and also SAS raid disks..
b. you need to order atleast 2 boxes/servers, one for CAS and one for CAM.. PAK keys/licenses are important here, because the image can be also downloaded from CCO, even if you lose the CD.. when you order the box, it comes with the base settings.. so, just to brief, you need 1 CAM, 1 CAS , licenses for both, CD's are common for CAS and CAM. its just we have to select the functionlaity at the last step of installation..
Hope this helps.. all the best..