Need help from folks with expertise in Solarwinds Network Performance Monitor
I am running Solarwinds NPM versino 8.1
on windows 2003 Enterprise Server
Service Pack 2. The solarwinds can
monitor my network devices and firewalls
just fine, with one exception:
I enable Solarwinds snmptrap. On my
cisco router, I have the following:
C3640#sh run | i snmp
snmp-server community cciesec RO
snmp-server trap link ietf
snmp-server location Rosewell Area 51, Nevada
snmp-server contact DoD
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps bgp
snmp-server host 192.168.3.10 cciesec
C3640#
When I shutdown the Ethernet interface
on the router with "shut/no shut" command, I can see events in Solarwinds.
via the snmptrap message. However,
when I shutdown the loopback interface
with "shut/no shut", I can see the snmp
trap message get to solarwinds but I am
not seeing the event in Solarwinds event
message. Same thing when my HSRP flaps.
Anyone know why?
