BACD on MGCP

Unanswered Question
Jan 7th, 2009
User Badges:

Hi,


I have CUCM 6.0 running in the network, Cu has remote site where we required BACD should runn


I have 2811 router with 12.4 15T IOS


I need a running config of BACD script.


Consider my dial in number is 8 digit


Please post guys i need it urgently.


I have extension in my network starting with 701501 701502


Also just the info site has only BRI line


What i required is when smeone dial that number it should say thkyou for calling XXXX please dial the extension number you wish to reach 2


And when someone dial the extension number it should go to the extension.


my dial-peer configuration will be


dial-peer voice 1 voip

session-target ipv4:loopback ip address

destination-pattern XXXXXXXX

service aa


I need BACD running configuation


Regards

Arshad

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
redesfusionet Fri, 04/10/2009 - 20:12
User Badges:

I see no one answer your call. You still need assistance here? Let me know

Ayodeji Okanlawon Fri, 04/10/2009 - 21:53
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi,


To run BACD you need tcl scripts and tcl scripts is not supported with MGCP, beacuse for this to fuction the gateway needs to local control of calls whic MGCP does not have

Actions

This Discussion