Not able to access resources from Specifc DMZ to other DMZ

jahangeer_abdul · ‎01-08-2009

Hi,

We are not able to access the Deilvery Channel Network Managemnet VLAN, rest other networks, I can able to Access it.

I have Attached the NAT and ACL configuration.....

Packet are not at all reaching that Sunbet...

I suspect something wrong with NAT, I Tried to resolve this Issue up to my best with no sucess.

I appreaciate your support on this Issue...

Regards,

Davy Ad · ‎01-09-2009

Hi Jahangeer,

I would like to know if all these are in the same Network with Inside or Not

nat (Application)

nat (Middleware)

nat (Antivirus)

nat (Delivery)

nat (Extranet)

nat (Management)

jahangeer_abdul · ‎01-09-2009

Hi,

They are different DMZ's. Below is Interface Details, it can helps you to have Idea.

DB-FWSM# sh ip add

System IP Addresses:

Interface Name IP address Subnet mask Method

Vlan4 remote 10.10.195.10 255.255.255.0 manual

Vlan5 ATM 10.10.200.252 255.255.255.0 manual

Vlan31 Inside 10.10.231.10 255.255.255.0 manual

Vlan32 Database 10.10.232.10 255.255.255.0 manual

Vlan33 Application 10.10.233.10 255.255.255.0 manual

Vlan36 Middleware 10.10.236.10 255.255.255.0 manual

Vlan38 Antivirus 10.10.238.10 255.255.255.0 manual

Vlan42 Delivery 10.10.234.10 255.255.255.0 manual

Vlan43 Extranet 10.10.235.10 255.255.255.0 manual

Vlan44 Management 10.10.193.10 255.255.255.0 manual

Vlan61 FWfailover 172.30.1.1 255.255.255.0 manual

Vlan62 FWstate 172.30.2.1 255.255.255.0 manual

Vlan63 Outside 172.30.3.1 255.255.255.0 manual

Vlan159 IPTUtility 10.10.159.252 255.255.255.0 manual

Thanks,