01-08-2009 08:58 AM - edited 07-03-2021 04:57 PM
Hi to all,
Can I set an AP (1200 o 1300 series) as client?
My problem is that I have to connect a video network camera to a WLAN but I cannot configure it as bridge. So I ask can I associate a AP as client to WLAN and then connect to eth of AP the netcamera?
Linksys do that with WET54G, but is linksys I prefer use Cisco!
Thanks a lot.
Augusto
Solved! Go to Solution.
01-08-2009 02:10 PM
You would need to configure the AP as a WGB or Universal WGB. this will allow the AP to associate to the network, and have a client out the ethernet.
HTH,
Steve
01-08-2009 02:10 PM
You would need to configure the AP as a WGB or Universal WGB. this will allow the AP to associate to the network, and have a client out the ethernet.
HTH,
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide