Remote Access Vpn not able to connect remote servers

Unanswered Question
Jan 8th, 2009
User Badges:

We have an Asa configured for the users to dial in through one (internet) interface.

The users in the (inside) LAN are connecting to the remote end servers through the (MPLS) interface. For this users have pat configured

access-list 101 extended permit ip

nat(inside) 1 access-list 101

global MPLS) 1 interface

Our problem is the users are able to dial

to the ASA and can access the LAN resources But cannot access the remote end network through PAT.

Is there any way to do this ??

Kindly help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
JORGE RODRIGUEZ Fri, 01/09/2009 - 06:10
User Badges:
  • Green, 3000 points or more

I would try bellow nat statement, also try looking at asdm real time log to see the errors while ra user tries accessing host in mpls side, or run packet-tracer and post its output .

nat(MPLS) 1

nat(MPLS) 1

girishkumar123 Fri, 01/16/2009 - 10:02
User Badges:

Hi Jorge,

Sorry for the delay in response because I was trying the same in a LAB environment. Here also I failed to get this dialed in VPN accross the PAT interface towards the remote machine. So is it possible for the dial in VPN users while dialed in to get accross a PATTED interface and access the remote servers

Is there any challenges in this ?

Please help.


This Discussion