directory number - secondary number on CUCM 6.X

Answered Question
Jan 9th, 2009
User Badges:

Hi all,

can i configure a directory number with two numbers (for example 100 for inbound internal call and 333333300 for inbound external call)?


Thanks' in advance

Diego

Correct Answer by Jaime Valencia about 8 years 2 months ago

if you're looking something similar to what you can have in CME of 2 numbers one internal and one E164 that's strictly a capability of CME, CUCM does not provide this


as already stated, 2 DNs need to be created or a translation pattern need to be configured


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
CHRIS CHARLEBOIS Fri, 01/09/2009 - 09:19
User Badges:
  • Silver, 250 points or more

You can A) create two seperate line appearances on the phone, one for internal (100) and one for external (3333333000), or B) translate the 3333333000 into 100 as it enters the voice network so internal and external inbound calls appear on the same line appearance. I do not know of a way to assign a single line appearance two seperate directory numbers.

David Hailey Mon, 01/26/2009 - 17:12
User Badges:
  • Purple, 4500 points or more

You cannot assign a single line appearance to multiple directory numbers.

Correct Answer
Jaime Valencia Mon, 01/26/2009 - 17:20
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

if you're looking something similar to what you can have in CME of 2 numbers one internal and one E164 that's strictly a capability of CME, CUCM does not provide this


as already stated, 2 DNs need to be created or a translation pattern need to be configured


HTH


java


if this helps, please rate

Actions

This Discussion