Solved: directory number - secondary number on CUCM 6.X

d.rocco · ‎01-09-2009

Hi all,

can i configure a directory number with two numbers (for example 100 for inbound internal call and 333333300 for inbound external call)?

Thanks' in advance

Diego

Jaime Valencia · ‎01-26-2009

if you're looking something similar to what you can have in CME of 2 numbers one internal and one E164 that's strictly a capability of CME, CUCM does not provide this

as already stated, 2 DNs need to be created or a translation pattern need to be configured

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

CHRIS CHARLEBOIS · ‎01-09-2009

You can A) create two seperate line appearances on the phone, one for internal (100) and one for external (3333333000), or B) translate the 3333333000 into 100 as it enters the voice network so internal and external inbound calls appear on the same line appearance. I do not know of a way to assign a single line appearance two seperate directory numbers.

David Hailey · ‎01-26-2009

You cannot assign a single line appearance to multiple directory numbers.

Jaime Valencia · ‎01-26-2009

if you're looking something similar to what you can have in CME of 2 numbers one internal and one E164 that's strictly a capability of CME, CUCM does not provide this

as already stated, 2 DNs need to be created or a translation pattern need to be configured

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate