HWIC-4T1/E1 and VWIC2-2MFT-G703

Answered Question
Jan 11th, 2009
User Badges:

Hi,


Can anybody help me in clarifying what is the difference between

VWIC2-2MFT-G703 and 4 Port clear channel Module (HWIC-4T1/E1

)in Cisco Routers.


Please provide the suitable solution

I pretty sure VWIC2-2MFT-G703 can be configured for maximum of 2 Channel-groups. How about 4 Port Clear channel card? Whether i can configure 31 independant channels (31 Links)

Correct Answer by paolo bevilacqua about 8 years 4 months ago

According to the datasheet, either framed or unframed operation is supported:


The modules support balanced and unbalanced E1 connectivity and conform to G.703 and G.704 standards for unframed and framed E1 modes.


http://www.cisco.com/en/US/prod/collateral/modules/ps5949/product_data_sheet0900aecd80710c77.html



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
hclisschennai Mon, 01/12/2009 - 23:03
User Badges:

Hi Sushil,


Thanks for your reply. I have surfed this link already before writing in this forum.


It is mentioned that 4 port clear channel supports only one channel.

1. is that mean i can configure only one channel group per port.

2. Whether it supports unframed also?


do you have any chance of worked with this port?


regards,


R.B.Kumar

hclisschennai Fri, 01/23/2009 - 10:07
User Badges:

Hi everybody,


Any clues..


what is the difference between

VWIC2-2MFT-G703 and 4 Port clear channel Module (HWIC-4T1/E1 in Cisco Routers.


I am pretty sure VWIC2-2MFT-G703 can be configured for maximum of 2 Channel-groups. How about 4 Port Clear channel card? Whether i can configure 31 independant channels (31 Links)



hclisschennai Sun, 01/25/2009 - 10:31
User Badges:

Hi,


Whether it is possible to create either framed (1984 Kbps-timeslot 1-31) or Unframed (2048 Kbps).


I know that it is not possible to create both in the same port. But I should be able to do it in atleast either


R.B.Kumar

Correct Answer
paolo bevilacqua Sun, 01/25/2009 - 11:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

According to the datasheet, either framed or unframed operation is supported:


The modules support balanced and unbalanced E1 connectivity and conform to G.703 and G.704 standards for unframed and framed E1 modes.


http://www.cisco.com/en/US/prod/collateral/modules/ps5949/product_data_sheet0900aecd80710c77.html



Actions

This Discussion