running/startup config through SNMP

Unanswered Question
Jan 12th, 2009

Hello,

I wanted to download configs through SNMP so I followed http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml#app

but when executing last command:

snmpset -v 1 -c private x.x.x.x .1.3.6.1.4.1.9.9.96.1.1.1.1.14.17 integer 4

I get an error:

Error in Packet.

Reason: (badValue) The value given has the wrong type or length.

Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.17

I am using c181x-advipservicesk9-mz.124-15.T3.bin. I would be grateful for your help!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Mon, 01/12/2009 - 08:40

You should have set all of the OIDs in one packet. In the example, the snmpset command is only run once.

Actions

This Discussion