01-12-2009 04:30 AM
Hi All,
Am I getting the following error on more than one port while changing the port speed from 2G to 4G on 9509.
Event:E_DEBUG, length:121, at 43883 usecs after Thu Jan 8 15:02:27 2009 [102] Ifindex (fc8/8)0x1387000, Err disabled (0x40290065) event (PI_FSM_EV_LCP_SET_PORT_CFG_RESP_RCVD)0xb8 due to Elsspc
Switch is working fine @2G. All other ports are set to 2G (Shared)
Any suggestion..?
Solved! Go to Solution.
01-12-2009 12:15 PM
Check the SFP installed in port 8/8 to be sure it is 4GB capable.
If it is, repost and we can dig deeper.
Hope this helps,
Mike
01-12-2009 12:15 PM
Check the SFP installed in port 8/8 to be sure it is 4GB capable.
If it is, repost and we can dig deeper.
Hope this helps,
Mike
01-15-2009 10:05 AM
Hello,
What model line card is it? What else do you have pulled into the port group and running at what speed?
Thank you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: