Group APs by which SSID to broadcast

Unanswered Question
Jan 12th, 2009
User Badges:

Hi all


Now, I have searched for this for several days - I want to determine which APs show certain SSIDs. There must be a smart way to do that beside using the override function on 100 different APs.


I have WLC 4404 and 1131AG-E-K9 LAPs.


Any suggestions?


Thanks in advance.


Peter

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
grzegorz.ciolek Mon, 01/12/2009 - 06:45
User Badges:

Hi,

Yes there is... but in 5.2.x version. Instead of WLAN override you are grouping AP. I think that below 5.2 you have only WALN Override.

Chers

Greg

pganet123 Mon, 01/12/2009 - 06:47
User Badges:

Thank you Greg.

Im running 4.2.112.0 right now, so must upgrade in future.



Rob Huffman Mon, 01/12/2009 - 06:59
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Peter,


The most popular way to mitigate the problem of having to access each AP individually (when using WLAN Override) is to use WCS Templates for common requirement AP's. This way the WLAN Override function can be applied at the Template level and then pushed out to the various groups.



http://www.cisco.com/en/US/docs/wireless/wcs/4.0/configuration/guide/wcstemp.html#wp1072198



Hope this helps!

Rob


pganet123 Mon, 01/12/2009 - 07:56
User Badges:

Well, it is certainly the most expensive way. I have no need of the Wireless Control System.


I will just upgrade my controller to ver. 5.2 and you can consider this topic as solved.



Actions

This Discussion

 

 

Trending Topics - Security & Network