cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
800
Views
0
Helpful
1
Replies

Linksys SRW224P Dead, only liited Console Access

Steffen.Baier
Level 1
Level 1

Hello,

I have upgraded my SRW224P to Firmware SRW224P_Opcode_V2.0.2.2.bix using XModem and now it fails to boot.

I can interupt it via CTRL&U and delete the startup-config and then assign the SRW224P_Opcode_V2.0.2.2.bix as the Startup File as a Runtime but after each reset or reboot it fails to boot again.

Message:

[code]<ERR> Diagnostic Loading Fail - Try Runtime

Loading Runtime Image File : SRW224P_Opcode_V2.0.2.2.bix

Runtime 2.0.2.2[/code]

And when I interrupt via CTRL + U

[code]File Name S/Up Type Size Create Time

--------------------------------- ---- ---- ---------- -----------

Factory_Default_Config.cfg 0 5 2771 24:00:17

SRW224P_Opcode_V2.0.2.2.bix 1 2 1850680 00:11:55

startup-config 1 5 2927 24:00:20

--------------------------------- ---- ---- ---------- ----------

[X]modem Download [D]elete File [S]et Startup File

[C]hange Baudrate [E]rase Flash [Q]uit

Select>[/code]

Any Hints anybody ?

Thanks

Steffen

1 Reply 1
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: