01-12-2009 08:15 AM - edited 03-15-2019 03:27 PM
I have purchased (waiting for delivery) of an FXO card to populate into my 2621XM router. My desire is to connect it to the analog port of my vonage box and integrate my Vonage "public" phone number with my Call Manager phone system.
Anyone have a working config that they would like to share?
Jeff
01-12-2009 09:23 AM
Hi, Vonage FXO is not different from any other FXO so if you have one of these already just copy. Else you would need to specify if you want to use H.323/SIPor MGCP with this GW.
01-12-2009 10:12 AM
I dont have an FXO installed and plan on using H.323 GW from CallManager perspective
01-12-2009 10:42 AM
In CM, configure an H323 GW with router's address. In router, under voice port configure "connection plar XXX opx" where XXX is the extension where your calls have to go. You will also need voip DP with CM address and destination-pattern XXX, and a pots DP with destinatition pattern like 9T. That's all.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide