ASDM Upgrade Issues

Answered Question
Jan 12th, 2009
User Badges:

I am trying to upgrade ASDM? Having issues upgrading ASDM image. I am connected to TFTP server and it has the ASDM image.


when i run command copy tftp disk0:

specify ipaddress and bin file process starts than i get an error message "md5(0xe369c14f 0x3fa969b4 0xdef65c91 0xfc3e7cb4)

Failed to verify ASDM file hash"


Is there a solution to resolve this?


Thanks


ALI

TEKMARK GLOBAL SOLUTIONS

Correct Answer by Richard Burts about 8 years 6 months ago

Ali


It sounds like there is a problem with the ASDM file on your TFTP server. Is it possible that there was a problem in copying the file when it loaded onto your TFTP server?


I would suggest that you go back and get a new copy of the ASDM file from Cisco to load on your TFTP server. Then try loading the new file to the disk0.


HTH


Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Correct Answer
Richard Burts Mon, 01/12/2009 - 14:13
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Ali


It sounds like there is a problem with the ASDM file on your TFTP server. Is it possible that there was a problem in copying the file when it loaded onto your TFTP server?


I would suggest that you go back and get a new copy of the ASDM file from Cisco to load on your TFTP server. Then try loading the new file to the disk0.


HTH


Rick

Actions

This Discussion