01-12-2009 02:33 PM - edited 07-03-2021 04:58 PM
Hi,
is it possible to works wireless 802.1x in WPA2/AES and auth PEAP-MSCHAP-V2 without use of certificat ?
Thanks,
Michel
01-12-2009 03:37 PM
No. You need a server-side certificate to use PEAP.
Good Luck
Scott
01-13-2009 12:37 AM
Hi,
Yes, just un-check the "Validate Server certificate" under Protected EAP Settings
01-13-2009 01:16 AM
Hi Michel,
Sorry, my reply to your post is wrong. Even you don't try to validate your server certificate, you must have one because this is a fundamental part of this method.
01-13-2009 04:57 AM
Hi,
You just need to have a certificate on the RADIUS-server to start PEAP. It's easy to generate a self-sign certificate, using Open-SSL.
The clients don't need any certifcate and don't need to know the server certifcate.
Good luck
Johan
01-13-2009 09:30 AM
Hi,
it's ok with just a self signed certificat on server.
thanks,
Michel
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: