01-12-2009 04:29 PM
I apologize as this is kind of a "Out There" request. I'm setting up my first "service provider" type MPLS network consisting of several 6500s and ASRs. I've been looking around for a while now for a good IOS to load on the 6500s that will support a PE role (with 20-25 CEs on each initially and scale from there).
As I am a bit new to this design selection - does anyone have a recommendation of a good IOS to look at (Sup 720s w/ MSFC 3s)? It would be great if the IOS showed support for FWSMs as there are a few in the mix that need to be used.
Any help would be appreciated. My mind spins a little when looking at several "similar" IOS versions that appear to have differing features.
Jim
Solved! Go to Solution.
01-13-2009 03:05 AM
Hello GP,
I agree we use
s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
with PE role and FWSM blade supported
Hope to help
Giuseppe
01-13-2009 01:20 AM
You can try s72033-adventerorisek9_wan-mz.122-18.SXF12a
Regards,
GP
01-13-2009 03:05 AM
Hello GP,
I agree we use
s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
with PE role and FWSM blade supported
Hope to help
Giuseppe
01-13-2009 08:55 AM
Thanks for your help guys (very appreciated). I'll take a close look at them.
Jim
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: